Our way for drying

is special.
More safe. More fast. More reliable. More gentle.

DRYING AFTER SURFACE FINISHING, PAINTING AND CLEANING

The HARTER purpose devised Airgenex® drying technology is capable of drying surfaces and solid matter of all kind in a gentle and energy saving way, plus reliably and fast. This so-called heat pump based condensation drying resolves drying problems and optimizes manufacturing processes.

On the following pages, you – no matter if you are a plant operator, construction company or planning office – may find advantages of our drying technology, how it works and where it is applied.

Your benefits

Very fast
Airgenex® condensation drying saves you 50% of time required by conventional drying methods, such as hot air drying or simple fan-based systems. You will be surprised how much we can reduce your drying time!

Very efficient
The heart of the Airgenex® dryer is a highly efficient heat pump based dehumidification module. Components installed are the best available, some of them purpose built for us, and are made from high grade materials. We combine air dehumidification with sophisticated air routeing such that the dry process air is directed only to where it is supposed to absorb humidity. Also, drying is effected in a closed system with heat recuperation. This makes drying take full effect while being extremely cost effective.

Very gentle
Airgenex® dries products or materials at low temperatures between 20°C and 90°C as required for the specific application. This low temperature drying prevents undesired heating of the materials and products. Stain-free parts and reduced reject quantity means higher productivity for you.

Very reliable
The dehumidification process takes place in a system which is closed in terms of thermal energy. Our drying systems are thus completely independent of effects of the climate and the weather. This ensures highest process reliability for you. Plus you are on the safe side if production quantities need to be raised.

Optimisation of existing drying systems
You have an existing drying system which does not or not fully meet your requirements? Contact us and we might find ways of upgrading your process chain by installing an Airgenex® dryer.

harter_technical_sales

Are you interested in our solutions for drying surfaces?

Contact us. Our technical sales team will be happy to provide you with initial information:

+49 (0) 83 83 / 92 23 24   |   info@harter-gmbh.de

harter_after_sales_service_ass

Are you already using a drying system from HARTER and have questions? Do you have any questions regarding maintenance, spare parts service or repairs?

Then Yasmin Keckeisen will be happy to assist you in our after-sales service:

+49 (0) 83 83 / 92 23 20   |   ass@harter-gmbh.de

We dry using dry air directed to the right places: A perfect interaction of air conditioning and air routeing provides the best drying result possible.

Click at the numbers inside the graphic to get further information.

Factors which will optimise the efficiency of the drying process vary for each application. In-barrel drying of bulk material poses challenges much different from those of drying racked products with complex geometries or painted surface.

The most common applications are shown below.

Your application is different?

You will surely understand that, with more than thousand drying systems installed, we cannot possibly list all our potential applications. If your application is not listed above, please do not hesitate to contact us. We will be glad to give you advice without engagement on your part!

DRYING OF RACKED PRODUCTS

BARREL DRYING

DRYING AFTER CLEANING OR RINSING

DRYING IN A CONTINUOUS PROCESS

PAINT DRYING

DRYING OF TUBES AND TUBE BUNDLES

Non-compressed Air Blowoff

OUR PILOT PLANT STATION – One of our special features.

Would you like to read in cold print how efficient our drying technology is for your specific application?

Our in-house pilot plant station may be used to conduct drying tests with your products. The purpose is to identify and record the relevant parameters for successful drying –
_ temperature, time & humidity
_ air speed & airflow rate
_ air routeing

You are, of course, welcome to witness testing and get a personal feel.

Button_Technikum_E

On-site testing.

Under special circumstances, we can also offer loan units for drying tests at your premises. One of our engineers will instruct you on how to run your own tests.

Creativity in tackling challenges.

You have a different or larger scale work for us to do? Welcome! Building larger scale test set-ups may be agreed. Analysis results will then be reflected in our planning and manufacture.

We have successfully installed more than 1000 drying systems to date. Here is a small selection of references.

 
Aalberts Surface Treatment
Balteschwiler AG
Bia Kunststoff- und Galvanotechnik GmbH & Co. KG
Biral Pumpen AG
Bitzer Kühlmaschinenbau GmbH
BMW Group
Bomag GmbH
Carl Zeiss  Vision GmbH
CeramTec GmbH Technische Keramik
Ceratizit Austria GmbH
Claudius Peters  Projects GmbH Aircraft Parts
Collini GmbH Oberflächenbeschichtung
Festo Vertrieb GmbH & Co. KG – Automatisierungstechnik
Galvano Wullimann AG Metallveredelung
geobra Brandstätter GmbH & Co. KG – Playmobil
Hansa Armaturen GmbH Sanitärarmaturen
Hertfelder Lackierwerk GmbH
IMO Oberflächentechnik GmbH
Inge Watertechnologies GmbH
John Toys GmbH
Kunststofftechnik Bernt GmbH
Liebherr Aerospace Lindenberg GmbH
Magna Exteriors GmbH
Mannesmann Precision Tubes
MTU Friedrichshafen GmbH
Mubea Präzisionstahlrohr AG
Prym Fashion GmbH
Reichert Holztechnik GmbH & Co. KG
Ruag AG
Scania Production  Meppel B.V.
Schirmer Galvanotechnik GmbH
Sick AG Sensoren
Silhouette International Schmied AG
Tigra GmbH  Hartmetall
Tyrolia – HTM Sport GmbH
Voestalpine Wire  Germany GmbH
Wanzl  Metallwarenfabrik GmbH
Weidmüller Interface  GmbH & Co. KG
ZF  Luftfahrttechnik GmbH