Cabinet dryer

Gentle batch drying on trays, pallets and sheets or in baskets and racks

  • Up to 45% subsidized acquisition costs

  • Save up to 75% on energy costs

  • 100% planning reliability thanks to premium after-sales service

Process-reliable drying in batch operation

Cabinet dryers from HARTER dry products in batches on trays, sheets or in baskets – reproducible, stain-free and gentle on materials. Airflow and temperature are precisely matched to the product, geometry and target residual moisture. This gives you a flexible, energy-efficient solution for changing batch sizes and demanding applications.

Do you have individual requirements that you would like us to test in advance?

From Idea to Custom Solution
Practical Tests in Our In-House Laboratory

For challenging applications, HARTER develops tailor-made custom solutions. In our technical center, we test your product under realistic conditions, define temperature and humidity windows, optimize cycle times, and document the results. Contact us – we will review your task without obligation and provide a clear recommendation for the next steps.

Contact our experts now +49 8383 9223‑210 or submit the contact form
2000

Drying systems

in over 20 countries stand for our quality

100

Employees

from all areas ensure a high level of vertical integration

+ 35

Years of experience

in the development of innovative drying systems

Your benefits

The dry process air is directed through the drying room and reaches all layers on the trays. This prevents over- or under-drying and ensures a homogeneous result over the entire batch.

Drying at moderate temperatures protects sensitive materials and surfaces. Water stains, warping or material stress are avoided – the product quality remains consistently high.

Whether flat components, small parts in baskets or mixed loads – the cabinet dryer adapts to your handling. Compartment heights and insertion positions can be adapted to the product and quantity.

The closed air circuit with heat pump and heat recovery significantly reduces energy consumption and ensures a room climate-independent process – for stable results and low operating costs.

Scalable for growing capacities

If required, a defined cooling can take place after drying – directly in the system, without additional equipment. This simplifies subsequent process steps and saves space.

Data acquisition and recipe management are available on request. Temperature, humidity and time can be saved as a recipe and recalled again and again for reproducible results.

In the technical center, temperature, humidity, time, air velocity and volume flow are determined for your product. On this basis, we configure your system – precisely tailored to the material, geometry and target residual moisture.
The Process

We dry with dry air and deliver it to the right places: A perfect interplay of air preparation and air guidance provides you with the best possible drying result.

Interface: Airgenex® Dehumidification Technology / Dryer – Moist air is extracted from the drying chamber and supplied to the dehumidification unit.

The pre-cooler pre-cools the air in a first stage. This significantly reduces the compressor’s energy consumption.

Moisture condenses on the fins of the air cooler and drains out of the drying system via the drip tray and condensate drain.

The cooled, dehumidified air is warmed up without additional energy by means of a pre-heater.
The air heater warms the air to the required process temperature.

The process air fan ensures the necessary air exchange between the Airgenex® dehumidification technology and the drying chamber.

Now, the dry, unsaturated air is guided into the drying chamber, where it absorbs the product’s moisture. Thus, the cycle is closed.

Efficiency that pays off.

Our HARTER drying systems save up to 75% CO₂ and are up to 45% governmentally funded.

Reliable – Competent – Long-term

Service that thinks ahead – for years to come

With the HARTER After-Sales Service, you secure a reliable and efficient drying solution for the long term. Whether it’s maintenance, spare parts supply, or technical adjustments – we support your system throughout its entire life cycle and ensure that it delivers optimal results at all times.

Performance Service

Optimal performance through our “all-round carefree package”

Custom Service

Flexible for changing requirements

Expert Service

Fast assistance in case of failure

Lifetime Service

So that the quality is always right

What Our Customers Say

Not convinced yet? Our customers are thrilled!

“Sometimes it’s better to say nothing and let your customers speak for themselves.”
– Regina Mader, Managing Director

“For several decades, we have been using a Harter sludge dryer in our contract electroplating facility and are very satisfied with it. The technology and service are reliable and have helped us save a significant amount of money on disposal.”

Daniel Hutter
Verzinkerei Kriessern AG

“BK Giulini GmbH has been successfully collaborating with Harter GmbH for approximately 20 years. We are very satisfied with both the dryer technology and the reliability of the entire system. Based on these positive experiences and the excellent service, we invested in another drying system of this type in 2023.”

Dimitri Baumbach
ICL Ladenburg / BK Giulini GmbH (ICL Group)

“In our waste incineration plant, we have saved a significant amount of money by drying our heavy metal-containing hydroxide sludge. The plant technology is sustainable and maintenance-friendly. In retrospect, the investment was a very good decision.”

Stefan Ringmann
KVA Linth
Submit your inquiry now

Please fill out the form now, and we will contact you as soon as possible.